[FREE SHIPPING] Granite Fitness Leg Press Add-on for 3x3" Lever Arms with 1" Pin Hole

Granite Fitness Leg Press Add-on for 3x3" Lever (Jammer) Arms with 1" Pin Hole

This is the version with 1" Pin Hole (SKU: GRT93), if your lever/jammer arms have 5/8" Pin Hole, please order the other Leg Press Add-on we have listed on our site (SKU: GRT88).

Granite Fitness Leg Press Add-on Kit is 100% made in Texas, USA, along with all Granite Fitness equipment. They are built tough, constructed from 2x2" 11ga tubing, 7ga and 1/4" USA steel, fully welded and powder coated textured black for a long lasting service at any gym.

NOTE: Before using Granite Fitness Leg Press kit or Lever Arms attachment on any Power Rack or Wall Mount Rack, the uprights must first be securely bolted to the floor to prevent tipping over or other falling incident. You will also need to secure your incline bench to prevent backward sliding as well as front lift. You can move the lever arms to higher position in order to eliminate the front incline bench lift.

Please Note: This sale is only for the Leg Press Add-on kit by itself. The Power Rack, Lever Arms, Incline Bench, Bumper plates, and other equipment shown in the pictures are NOT included with this sale. Thank you.

This is the version with 1" Pin Hole (SKU: GRT93), if your lever/jammer arms have 5/8" Pin Hole, please order the other Leg Press Add-on we have listed on our site (SKU: GRT88).

If you already have 3x3" Lever / Jammer / Trolley Arms with 1" pin holes, you can now upgrade them into a leg press implement with our Leg Press Add-on kit. This particular Leg Press Add-on is designed to mount onto almost all 3x3" tubing with 1" pin holes, regardless of the width of the Power Rack because the foot plate is designed to be width adjustable to adapt onto different Power Rack width. We have tested the loading pin up to 450lb each side and we have also confirmed that the efficiency of the kit is approximately 35% to 70%  progressively i.e. if you load up the loading pin, you will get the workout you're looking for!

Granite Fitness Leg Press Add-on for Lever Arms come complete with grip tape on the foot plate, loading pin and main brackets are fully welded and powder-coated textured black. We recommend setting up the Leg Press at a higher position so that your overall position on your incline bench will be more comfortable and prevent front-end bench lift. We also recommend you prevent your incline bench from sliding backward with some wood from Home Depot or set it up against a wall, etc.

NOTE: Before using Granite Fitness Leg Press kit or Lever Arms attachment on any Power Rack or Wall Mount Rack, the uprights must first be securely bolted to the floor to prevent tipping over or other falling incident. You will also need to secure your incline bench to prevent backward sliding as well as front lift. You can move the lever arms to higher position in order to eliminate the front incline bench lift.

Please Note: This sale is only for the Leg Press Add-on kit by itself. The Power Rack, Lever Arms, Incline Bench, Bumper plates, and other equipment shown in the pictures are NOT included with this sale. Thank you.